MTA+ Applicator 0.8MM

Reusable dental tools for handling and application of prepared measure of MTA+ material. The tools are made of corrosive-resistant stainless steel.
Diameter 0.8mm

Instructions for use:

In order to use the product, insert the piston into the corresponding handle, then pull back the piston about 1 cm.
Put the previously prepared MTA+ material on the glass plate and thrust the measurement of the preparation into the carrier tip.
Place the tip of the applicator directly into the area intended, and then press the plunger to apply the material.

WARNING!
After use, any residue of material should be removed from the device and it should then be rinsed with water to ensure it is completely clear of any cement to prevent hardened, encased cement developing.

Click on the pictures to enlarge it.
           Picture 1                              Picture 2                             Picture 3

Picture 4                     Picture 5

Instruction of use:

Download